A spatial panel statistical analysis on cultivated land conversion and chinese economic growth

The conflict between cultivated land protection and economic development has become increasingly acute in recent years. Despite, intensive researches made on this conflict, little attention has been paid to the spatial correlation of variables. In view of this, the paper introduces the spatial panel regression model to estimate, and test whether the relationship between economic growth and cultivated land conversion conforms to Kuznets curve. Research results show that the area of converted cultivated land in China exhibits strong spatial auto-correlation; the spatial panel model with time effect and fixed effect is more stable and significant than conventional panel mode, and that the relationship between economic growth and cultivated land conversion agrees with the inverted U-shape of Kuznets curve, with inflection point occurring when average per capita GDP reaches ¥31330.93 (calculated at comparable price of 1999). On the basis of analysis, it is suggested that the government, with a view to developing economy alongside protecting cultivated land, should attach more importance to land use and planning in the future, pay more attention to the spatial correlation of cultivated land planning in adjacent areas and make greater efforts to increase the input–output ratio of land.     

Accessing the Two‐Electron Charge Storage Capacity of MnO2 in Mild Aqueous Electrolytes

Rechargeable batteries based on MnO₂ cathodes, able to operate in mild aqueous electrolytes, have attracted attention due to their appealing features for the design of low‐cost stationary energy storage devices. However, the charge/discharge mechanism of MnO₂ in such media is still a matter of debate. Here, an in‐depth quantitative spectroelectrochemical analysis of MnO₂ thin‐films provides a set of unrivaled mechanistic insights. A major finding is that charge storage occurs through the reversible two‐electron faradaic conversion of MnO₂ into Mn²⁺ in the presence of a wide range of weak Brønsted acids, including the [Zn(H₂O)₆]²⁺ or [Mn(H₂O)₆]²⁺ complexes present in aqueous Zn/MnO₂ batteries. Furthermore, it is shown that buffered electrolytes loaded with Mn²⁺ are ideal to achieve highly reversible conversion of MnO₂ with both high gravimetric capacity and remarkably stable charging/discharging potentials. In the most favorable case, a record gravimetric capacity of 450 mA·h·g^?1 is obtained at a high rate of 1.6 A·g^?1, with a Coulombic efficiency close to 100% and a MnO₂ utilization of 84%. Overall, the present results challenge the common view on MnO₂ the charge storage mechanism in mild aqueous electrolytes and underline the benefit of buffered electrolytes for high‐performance rechargeable aqueous batteries.     

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Single‐layered organic solar cells (OSCs) using nonfullerene acceptors have reached 16% efficiency. Such a breakthrough has inspired new sparks for the development of the next generation of OSC materials. In addition to the optimization of electronic structure, it is important to investigate the essential solid‐state structure that guides the high efficiency of bulk heterojunction blends, which provides insight in understanding how to pair an efficient donor–acceptor mixture and refine film morphology. In this study, a thorough analysis is executed to reveal morphology details, and the results demonstrate that Y6 can form a unique 2D packing with a polymer‐like conjugated backbone oriented normal to the substrate, controlled by the processing solvent and thermal annealing conditions. Such morphology provides improved carrier transport and ultrafast hole and electron transfer, leading to improved device performance, and the best optimized device shows a power conversion efficiency of 16.88% (16.4% certified). This work reveals the importance of film morphology and the mechanism by which it affects device performance. A full set of analytical methods and processing conditions are executed to achieve high efficiency solar cells from materials design to device optimization, which will be useful in future OSC technology development.     

Engineering Local Coordination Environments of Atomically Dispersed and Heteroatom‐Coordinated Single Metal Site Electrocatalysts for Clean Energy‐Conversion

Carbon‐based heteroatom‐coordinated single‐atom catalysts (SACs) are promising candidates for energy‐related electrocatalysts because of their low‐cost, tunable catalytic activity/selectivity, and relatively homogeneous morphologies. Unique interactions between single metal sites and their surrounding coordination environments play a significant role in modulating the electronic structure of the metal centers, leading to unusual scaling relationships, new reaction mechanisms, and improved catalytic performance. This review summarizes recent advancements in engineering of the local coordination environment of SACs for improved electrocatalytic performance for several crucial energy‐convention electrochemical reactions: oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, CO₂ reduction reaction, and nitrogen reduction reaction. Various engineering strategies including heteroatom‐doping, changing the location of SACs on their support, introducing external ligands, and constructing dual metal sites are comprehensively discussed. The controllable synthetic methods and the activity enhancement mechanism of state‐of‐the‐art SACs are also highlighted. Recent achievements in the electronic modification of SACs will provide an understanding of the structure–activity relationship for the rational design of advanced electrocatalysts.     

Half‐Heusler Thermoelectric Module with High Conversion Efficiency and High Power Density

Half‐Heusler (HH) compounds have shown great potential in waste heat recovery. Among them, p‐type NbFeSb and n‐type ZrNiSn based alloys have exhibited the best thermoelectric (TE) performance. However, TE devices based on NbFeSb‐based HH compounds are rarely studied. In this work, bulk volumes of p‐type (Nb_0.8Ta_0.2)_0.8Ti_0.2FeSb and n‐type Hf_0.5Zr_0.5NiSn_0.98Sb_0.02 compounds are successfully prepared with good phase purity, compositional homogeneity, and matchable TE performance. The peak zTs are higher than 1.0 at 973 K for Hf_0.5Zr_0.5NiSn_0.98Sb_0.02 and at 1200 K for (Nb_0.8Ta_0.2)_0.8Ti_0.2FeSb. Based on an optimal design by a full‐parameters 3D finite element model, a single stage TE module with 8 n‐p HH couples is assembled. A high conversion efficiency of 8.3% and high power density of 2.11 W cm^?2 are obtained when hot and cold side temperatures are 997 and 342 K, respectively. Compared to the previous TE module assembled by the same materials, the conversion efficiency is enhanced by 33%, while the power density is almost the same. Given the excellent mechanical robustness and thermal stability, matchable thermal expansion coefficient and TE properties of NbFeSb and ZrNiSn based HH alloys, this work demonstrates their great promise for power generation with both high conversion efficiency and high power density.     

In Situ Conversion of Cu3P Nanowires to Mixed Ion/Electron‐Conducting Skeleton for Homogeneous Lithium Deposition

The introduction of 3D wettable current collectors is one of the practical strategies toward realizing high reversibility of lithium (Li) metal anodes, yet its effect is usually insufficient owing to single electron‐conductive skeleton. Here, homogeneous Li deposition behavior and enhanced Coulombic efficiency is reported for electrochemically lithiated Cu₃P nanowires, owing to the formation of a mixed ion/electron‐conducting skeleton (MIECS). In particular, by evaluating the Gibbs free energy change, the possible chemical reaction between Cu₃P and molten Li is used to construct a MIECS containing Li₃P and Cu–Li alloy phase. The successful conversion of Cu₃P nanowires to Li₃P and Cu–Li alloy nanocomposite not only greatly reduces the surface energy between molten Li and Cu₃P, but also induces uniform Li stripping/plating behavior via balanced ion/electron transport. Thus, the as‐obtained Li@MIECS composite anode displays superior cycling stability in both symmetric cells and full cells. This work provides a promising option for the preparation of high‐performance composite Li anodes containing MIECS by thermally pre‐storing Li.     

不同饲养密度对亮斑扁角水虻幼虫生长发育及新鲜牛粪转化率的影响

为了解决养牛业中粪便污染问题,本研究利用亮斑扁角水虻(黑水虻)来转化利用牛粪,探讨了饲养密度对新鲜牛粪的转化效率。本试验以亮斑扁角水虻为研究对象,选择设置每20.0 kg牛粪投入3500头、8750头、17500头4日龄幼虫3个处理密度,在每个密度日均1.0 kg等量饲喂条件下,分析亮斑扁角水虻幼虫百虫重、粗蛋白、粗脂肪、牛粪转化率指标的差异,探索一种适于亮斑扁角水虻幼虫处理新鲜牛粪的饲养密度。结果表明:百虫重、粗蛋白、粗脂肪3个指标在3组处理之间都存在极显著差异。百虫重和粗脂肪两个指标和试验组密度情况在0.01的水平上显著负相关,但3个处理中转化率最高的为8750头的饲养密度。综合评价认为亮斑扁角水虻4日龄幼虫8750头/20.0 kg牛粪的投入量为实验范围内最佳饲养密度。     

Effect of ractopamine and conjugated linoleic acid on performance of late finishing pigs

The dietary inclusion of feed additives to improve the carcass characteristics of the final product is of great importance for the pork production chain. The aim of our study was to evaluate the effects of the association of ractopamine (RAC) and conjugated linoleic acid (CLA) on the performance traits of finishing pigs during the last 26 days prior to slaughter. In total, 810 commercial hybrid barrows were used. Animals were distributed among treatments according to a randomised block design in a 3 × 3 factorial arrangement, with three RAC levels (0, 5 or 10 ppm) and three CLA levels (0, 0.3 or 0.6%). Pigs fed the diet with 5 ppm RAC had higher average daily feed intake (ADFI) (2.83 kg; P < 0.05) when compared with those fed 10 ppm RAC and the control diet (2.75 and 2.74 kg, respectively). Lower ADFI values (P < 0.01) were observed with the diets containing CLA compared with the control diet with no CLA (2.73 and 2.75 v. 2.85 kg/day, respectively). The average daily weight gain of pigs fed 5 and 10 ppm RAC was +148 and +173 g/dayhigher (P < 0.001), respectively, than those fed the control diet. Dietary RAC levels influenced (P < 0.001) feed conversion ratio (FCR), which was reduced as RAC levels increased, with the pigs fed 10, 5 and 0 ppm RAC presenting FCR values of 2.57, 2.71 and 3.05, respectively. FCR also improved (P < 0.05) with the inclusion of 0.6% CLA relative to the control diet (2.70 v. 2.84, respectively). There was a significant interaction between CLA × RAC levels (P < 0.01) for final BW, loin eye area (LEA) (P < 0.05) and backfat thickness (BT) (P < 0.05). The treatments containing 10 ppm RAC + 0.6% or 0.3% CLA increased LEA and reduced BT. In conclusion, the level of 10 ppm inclusion of RAC increased the overall performance parameters of pigs and therefore improved production efficiency. The combined use of RAC and CLA promoted a lower feed conversion ratio as well as better quantitative carcass traits, as demonstrated by the higher LEA and lower BT. The dietary inclusion of CLA at 0.3% improved feed efficiency, however, without affecting LEA or BT yields.